HR0129 Sharp GP2Y1014AU dust sensor detecting dust dust sensor PM2.5 for Arduino Compatible (GP2Y1014AU)

Package:

1, HR0129 Sharp GP2Y1014AU dust sensor detecting dust dust sensor PM2.5 for Arduino Compatible dust sensors (1)

2, 150ohm resistor (1)

3, 220uF caps (1)

4, 6pin connector (1)

 

An overview of the Sharp optical dust sensor (GP2Y1010AU0F) in the detection of very fine particles, such as cigarette smoke, is particularly effective, And is commonly used in air purification systems

 

The device, an infrared light emitting diode and a phototransistor, diagonally arranged to allow the detected light reflected from the dust in the air

 

The sensor has an extremely low current consumption (maximum 20mA,11 Ma typical), can carry up to 7VDC sensors. Is an analog voltage output proportional to the measured concentration, sensitivity and 0.5V/0.1mg/m3

 

Specifications:

Power supply voltage: 5-7V

Operating temperature:-10-65 degrees Celsius

Current consumption: 20mA maximum

Smallest particles detected value: 0.8 micron

Sensitivity: 0.5V/(0.1mg/m3)

Clean-air voltage: 0.9V typical

Operating temperature:-10~65°

Storage temperature:-20~80°

Service life: 5 years

Size: 46mmx30mmx17.6mm

Weight: 15G

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: