HS0941 OEP3W Mono Mini Digital Power Amplifier Board Module DC 5V 3W Variable Board
Product details:
· Specifications Model: OEP3W_2.54MM amplifier
· Working mode: Class D (PWM modulation)
· Chip: OEP3W
· Number of channels: Mono
· Power supply range: DC2.5 ~ 5V
· Amplifier gain: 20dB (change resistance parameter adjustable)
· Input impedance: 46k Ω
· Output impedance: 8 ~ 4 Ω
· Quiescent current: 3mA (5v power supply)
· Shutdown current: <0.1mA (5v power supply)
· Recommended sound: 3 ~ 10w
· Signal to noise ratio: 95bB
· Harmonic Distortion: <0.1%
· Frequency response range: 30Hz ~ 20kHz
· Operating temperature: -40 ~ 85
· Cooling volume: no heat dissipation
· Protection function: no protection function
· Note: Gain is suitable for computer use
· Output power: 3w THD + N = 10% (4Ω, 5v)
· 1.8w THD + N = 10% (8Ω, 5v)
· 2.5w THD + N = 1% (4Ω, 5v)
· 1.4w THD + N = 1% (8Ω, 5v)
Product Size:
Product pin definition and function:
· CS: chip select (floating or high, boot; low, shutdown)
· IN-: audio signal input negative
· IN +: audio signal input positive
· GND: Power ground
· VCC: Positive power supply
· SP +: audio signal output positive, then horn +
· SP-: audio signal output positive, then speaker -
Precautions:
1. Power supply positive and negative can not be reversed, the power supply voltage can not exceed 5.5V, as long as there is one case, IC burned;
2. The chip has a high gain buffer, can not change any component parameters on the board, does not meet the parameters will lead to IC damage;
3. Enter the line as far as possible with a shielded line, you can play a role in anti-interference, to eliminate the clutter current sound.