Currency - $  
HS2001 Geeetech 3D WiFi Module TF Card USB2.0 Support Wireless Wifi Box

HS2001 Geeetech 3D WiFi Module TF Card USB2.0 Support Wireless Wifi Box

Brand:Haitronic
Product Code:HS2001
Availability:9999
Qty:     - OR -   Add to Wish List Add to Compare

HS2001 Geeetech 3D WiFi Module TF Card USB2.0 Support Wireless Wifi Box

Feature:
1. Geeetech developed 3D WiFi Module, with the only aim of enabling all the 3D printing hobbyists to control their printer wireless.
2. 3D WiFi Module is mainly composed of two parts: control board and Wi-Fi module.
3. Thumb-size as it is, it is powerful enough to connect your 3D printer with Geeetech cloud server, making it a reality for you to control your device on EasyPrint 3D App.
4. 3D WiFi Module is ready to use right out of box. You just need to connect your printer to its USB port and finish simple configurations on EasyPrint 3D App. Then you can start to control your printer wireless.

5. 3D WiFi Module is cloud-based. Via EasyPrint 3D App, it is extremely simple and convenient to direct control over your printer anywhere and anytime.

6. Besides, you would have access to a large cloud gallery, which covers 9 categories of 3D models for printing.

7. What's more exciting is that you could record and share your printing moments on EasyPrint 3D App in seconds.
8. 3D WiFi Module is broadly compatible with many different kinds of 3D printers on the market.
9. As long as the USB to serial chip of your printer belongs to one of these three ones (CH340, FT232 and PL2303) and is controlled by G.code instructions, our 3D WiFi Module can upgrade your machine as Wi-Fi enabled and make it comparable to other prohibitively expensive Wi-Fi connected 3D printers.
10. Coded professionally and adopting high-performance chips, 3D WiFi Module could transmit model files and your commands to your printer in a stable and reliable way.
11. Apart from all the geeetech 3D printers,3D wifi module is compatible with most of the available consumer 3D printers out of the box, including: for Creality CR-10,for Mono price Select, for Anycubic I3 Mega, for Anet A8 ect

Specification:
CPU:STM21F107+ESP8266
Power: 5V DC
Working current: 150mA (average) 500mA (crest value)
TF Card: SDSC, SDHC (< 32G) GLASS2, GLASS4
Frequency range: 2.4-2.5G (2400-2483.5M)
Antenna: PCB board antenna

Reception sensitivity:
802.11b:-91dBm(11mbS)
802.11g:-75dBm (54mbS)
802.11n:-72dBm (MCS7)

Emission frequency:
802.11b:+20dBm
802.11g:+17dBm
802.11n:+14dBm
WiFi mode: Station/Softap
WLAND standard: 802.11b/g/n
Safety mode: WPA/WPA2
Encryption type: WEP/TKIP/AES
Network protocol: IPv4, TCP/UDP/HTTP/FTP/MQTT
Size: approx.49.37*25.87*16.5mm/1.94*1.01*0.64''

  

Write a review



Note: HTML is not translated!

Bad           Good